Gmade 1/10 GS02F Buffalo Pickup TS 4WD Crawler Car Kit EP

The optional parts (TS03 Upper Ball (4 pcs)  & 5.8mm Silver Ball (24 pcs)) will be given during the Pre-Order period.

*rcMart reserve all rights of the campaign.


Description:

This is Gmade 1/10 GS02F Buffalo Pickup TS 4WD Crawler Car Kit EP.

Feature:

• STEEL LADDER FRAME

• ADJUSTABLE WHEELBASE: GS02F chassis allows three type of easy adjustment of wheelbase convert kit to use any type of 313 and 324mm custom bodies. (optional link kits are sold separately)

• FRONT WEIGHT BALANCE

• FRONT MOUNTED MOTOR: Able to use 540 or 550 size motor with cooling fan with option. The motor is designed to mounted in front of the chassis, so it can increases more tire traction to the front side.

• MULTIPLE BATTERY LOCATIONS

• CHASSIS MOUNTED SERVO SYSTEM WITH PANHARD BAR

• The GS02F transmission is designed to look as a real 1:1 scale vehicle, and provides the best performance according to the driving situation.

• The GS02F transmission is designed to rotate the front wheel faster than the rear wheel.

• BETTER STEERING RADIUS: Vehicles with overdrive on the front axle has an improved steering radius compared to non-overdrive vehicles, making it easier to control when driving on the rough surfaces.

• BETTER CLIMBING: Increasing of the tire traction allows the vehicle to pass through steep slopes and obstacles without lifting the front of the body upward.

• 2-SPEED HI/LO TRANSMISSION

• TORQUE TWIST REDUCE TRANSMISSION

• EASY ADJUST MOTOR MOUNT

• Dual slipper clutch

• All metal internal gears

• Hardened carbon steel universal joints

• GA44 AXLE

• KINGPIN ANGLE: Keeping the scrub radius to a minimum to let your steering servo work at it''s full potential and increases the steering efficiency.

• HI STEER KNUCKLE ARM: By increasing the approach angle, you can over climb the obstacles more easily than a typical trial trucks.

• ADJUSTABLE CASTOR

• ZERO ACKERMAN STEERING

• SD SCALER SHOCK ABSORBER

• MT-1903 1.9 INCH M/T OFF-ROAD TIRE

• 1.9INCH NR01 BEADLOCK WHEEL

• BUFFALO PICKUP LEXAN BODY

• STEALTH BODY MOUNT

Specification:

• Width : 237mm

• Height : 249mm

• Height(with out roof rack) : 242mm

• Length : 542mm

• Wheel base : 313mm

• Ground clearance : 73mm

• Weight (no electronics) : 2.16kg

Include:

• Gmade 1/10 GS02F Buffalo Pickup TS 4WD Crawler Car Kit EP (1 set)
  

Required:

• Radio System

• Servo

• ESC

• Motor

• Battery

• Receiver